Quick Enquiry

+91 98 19 39 28 50

Super alloy NITRONIC60 is the best non-galling stainless steel. The following datasheet gives an overview of super alloy NITRONIC60.

Chemical Composition

The chemical composition of super alloy NITRONIC60 is highlighted in the following table.

Physical Properties

The physical properties of super alloy NITRONIC60 are given in the following table.

Mechanical Properties

The following table outlines the mechanical properties of super alloy NITRONIC60.

Thermal Properties

The thermal properties of Nitronic50 alloy are given in the following table.

Fabrication and Heat Treatment

  • Machinability: Positive feeds, slow speeds, and resulphurized lubricants are suitable for machining super alloy NITRONIC60.
  • Forming: Super alloy NITRONIC60 can be formed using standard techniques.
  • Welding : Super alloy NITRONIC60 can be welded using common welding techniques such as gas metal arc welding, gas tungsten arc welding, and submerged arc
  • Forging: Super alloy NITRONIC60 is forged by heating at 1094°C (2000°F) followed by soaking.
  • Bannealing: Super alloy NITRONIC60 is annealed by soaking at 1038 to 1122°C (1900 to 2050°F) followed by quenching in water or air.
  • Hardening: Super alloy NITRONIC60 can be hardened only by cold working.

Other Designations

Other designations that are equivalent to super alloy NITRONIC60 include:

  • AMS 5848
  • ASTM A193 (B8S, B8SA)
  • ASTM A194 (B8S, B8SA)
  • ASTM A240
  • ASTM A276
  • ASTM A479
  • ASTM A555
  • ASTM A580


Super alloy NITRONIC60 is used in the following applications:

  • Internal combustion valves and seats
  • Pump components
  • Bridge spacers
  • Pin and roller bearings
  • High wear applications

Our Products

Round Bars
Hollow Bars
Hex Bars
Sqaure Bars
Flat Bars
Plates and Sheets
Pipes and Tubes